Difference between revisions of "Recording Studio Patch Bays"
Jump to navigation
Jump to search
(Created page with "The patch bays in the recording studios are a combination of Miniature Bantam and B-Gauge, dependent upon what the connections are being used for. In general, the larger B-Ga...") |
|||
| Line 2: | Line 2: | ||
In general, the larger B-Gauge connections are used for microphone tie lines and pathways that may carry 48V phantom power. Connections between outboard devices within a studio are carried on Miniature Bantam, which prevents accidental cross-connection and increases the number of devices that can be connected to a single patch bay. | In general, the larger B-Gauge connections are used for microphone tie lines and pathways that may carry 48V phantom power. Connections between outboard devices within a studio are carried on Miniature Bantam, which prevents accidental cross-connection and increases the number of devices that can be connected to a single patch bay. | ||
| + | |||
| + | Please note that B-Gauge is often referred to as 'GPO', which is a reference to 'General Post Office'. These type of connections were routinely used in telephone exchanges and switchboards, which were run by the Post Office before the existence of British Telecom. | ||
==Technical Information== | ==Technical Information== | ||
| + | ===B-Gauge=== | ||
| + | |||
===Miniature Bantam=== | ===Miniature Bantam=== | ||
[[Media:NP3TT-P Assembly Instructions.pdf|Assembly Instructions]] | [[Media:NP3TT-P Assembly Instructions.pdf|Assembly Instructions]] | ||
Revision as of 09:19, 27 March 2017
The patch bays in the recording studios are a combination of Miniature Bantam and B-Gauge, dependent upon what the connections are being used for.
In general, the larger B-Gauge connections are used for microphone tie lines and pathways that may carry 48V phantom power. Connections between outboard devices within a studio are carried on Miniature Bantam, which prevents accidental cross-connection and increases the number of devices that can be connected to a single patch bay.
Please note that B-Gauge is often referred to as 'GPO', which is a reference to 'General Post Office'. These type of connections were routinely used in telephone exchanges and switchboards, which were run by the Post Office before the existence of British Telecom.
