Difference between revisions of "Cables and Connectors"

Latest revision as of 11:30, 5 April 2017

A wide variety of cabling is used around New Adelphi. Below are our cabling standards.

There is further information available on the in-house Protocols used over the building infrastructure.

All coaxial cabling is 75 ohm with local terminations on BNC connectors. Patch panels are MUSA standard.

All fibre is single mode with LC connectors, housed in Neutrik OpticalCON DUO NO2-4FDW-1-A chassis connectors.

All twisted pair wiring is CAT6 cable with Neutrik NE8FDY-C6 local terminations.

All recording studio microphone cable is Van Damme Tour Grade with Neutrik NC3MXX and NC3FXX connectors.

For quick identification of length, the following colour scheme is used:

@@ Line 1: / Line 1: @@
 A wide variety of cabling is used around New Adelphi. Below are our cabling standards.
+There is further information available on the in-house [[Protocols]] used over the building infrastructure.
 ==Infrastructure==
 ===Coaxial===
-All coaxial cabling is 75 ohm with [https://en.wikipedia.org/wiki/BNC_connector '''BNC'''] local terminations. Patch panels are [https://en.wikipedia.org/wiki/Musa_connector '''MUSA'''] standard.
+All coaxial cabling is 75 ohm with local terminations on [https://en.wikipedia.org/wiki/BNC_connector '''BNC'''] connectors. Patch panels are [https://en.wikipedia.org/wiki/Musa_connector '''MUSA'''] standard.
 ===Fibre===
 All fibre is '''single mode''' with [https://en.wikipedia.org/wiki/Optical_fiber_connector '''LC'''] connectors, housed in '''Neutrik OpticalCON DUO [http://www.neutrik.com/en/data/opticalcon/opticalcon-duo-chassis-connectors/no2-4fdw-1-a NO2-4FDW-1-A]''' chassis connectors.
+===Twisted Pair===
+All twisted pair wiring is '''[https://en.wikipedia.org/wiki/Category_6_cable CAT6]''' cable with '''Neutrik [http://www.neutrik.com/en/ethercon/cat6/ne8fdy-c6 NE8FDY-C6]''' local terminations.
 ==Recording==